Need help?Do you have a question about the Miele PW 6241 and is the answer not in the manual?
General| Load Capacity | 6 kg |
|---|---|
| Energy Efficiency Class | A+++ |
| Water Consumption | 49 l |
| Noise Level (Spinning) | 74 dB |
| Loading type | Front Loading |
Explains the meaning of various symbols used for safety warnings and instructions on the machine.
Defines the intended applications for the washing machine and lists actions that are strictly prohibited.
Covers essential safety measures for installation, maintenance, and electrical connections by qualified personnel.
Details proper usage, load limits, door handling, and chemical safety to prevent damage and injury.
Instructions for the safe disposal of packaging materials and old washing machines.
Advice on optimizing energy and water usage for efficient washing cycles.
Identifies and explains the primary external components of the washing machine.
Detailed explanation of the display, buttons, dial, and card reader on the control panel.
Describes the specific actions and uses of various function buttons for program control.
Explains the use of program cards for custom wash sequences and data transfer.
Steps for first-time use, including commissioning and preparing laundry for washing.
Details maximum load weights for programs and guides on detergent/bleach dispensing.
How to select programs and add extra functions like pre-wash or no spin.
Guides on starting programs, adjusting parameters, and understanding program progress.
Instructions for opening the door after the cycle and handling program interruptions.
Steps for using program cards to select and start wash programs via the card reader.
Explains using program cards for specific laundry loads in supervisor level.
How to change display language and set a delayed start time for programs.
Adding pre-wash, starching, or selecting a program without spin.
Procedures for stopping, canceling, or skipping parts of a wash program.
Details the components and setup of the optional liquid dispensing system.
Process for calibrating dispenser pumps and maintaining the dispensing system.
Reading and managing machine operating data and program-specific logs.
Procedures for deleting data and using the load weighing system.
Solutions for problems with the drum door not opening or safety catch disengagement.
Procedures for power outages and identifying causes of excessive foaming.
Explains common error messages like service intervals, faults, and intake issues.
Guidance on how to contact customer service for malfunctions, including necessary information.
How to clean the machine's exterior and prevent/remove rust build-up.
Procedures for thoroughly cleaning the detergent drawer, compartments, and siphons.
Maintenance for drum shaft bearings and preparing the machine for long-term storage.
Explains the meaning of various symbols and identifiers found on the machine's data plate.
Details the A-weighted noise power levels for PW 6241 and PW 6321 models.
Steps for initial machine setup, leveling, and removing shipping safety elements.
Instructions for connecting water supply lines and drainage systems.
Guidelines for safe electrical hookup, RCDs, and equipotential bonding.
How to connect dispenser pumps and steam lines, noting technician requirements.
Initial steps for preparing laundry and powering on the machine.
Guidance on adding detergents and choosing a wash program.
How to start, manage, and complete wash programs, including post-wash actions.
To Next Page
