Cleaning and care
59
Drum shaft bearings
Once the service interval has been reached, the following message
appears in the display:
Drum bearing lubrication
Call Technical Service.
This message is removed by pressing the button. It appears after
switching on the machine until the service technician has performed
this work.
Disconnect the machine from the electrical supply.
Use grease nipples to lubricate the drum shaft bearings with Ar-
canolL100 grease after approx. 1,000 operating hours.
Downtimes
If the machine is to be shut down for an extended period (4weeks or
more), grease the drum bearings in accordance with the maintenance
instructions before shutting down the machine and rotate the drum a
few revolutions. Repeat this drum rotation every 4weeks to prevent
bearing damage.
To Next Page
Loading...
Need help?
General
