Need help?Do you have a question about the Miele S 524 and is the answer not in the manual?
General| Dust Capacity | 4.5 l |
|---|---|
| Weight | 5.4 kg |
| Cord Length | 9 m |
| Dustbag Capacity | 4.5 l |
| Filtration | AirClean System |
| Filter System | AirClean |
Guidelines for safe and proper repair and maintenance procedures, adhering to national and local codes.
Step-by-step instructions for removing the storage slot and related components.
Steps to remove the casters (support rollers) from the vacuum cleaner.
Instructions for removing the bag holder, including opening the casing top and releasing tabs.
Steps to remove the vacuum pressure monitor, involving casing disassembly and connector disconnection.
Procedure to remove the accessory compartment lid by opening it wide and levering it free of catch tabs.
Steps for removing the casing top, involving opening, filter removal, and levering hinge arms.
Instructions for installing the casing top, including hinge insertion and securing.
Instructions for removing the bumper strip, referencing the storage slot removal procedure.
Procedure for replacing the casing top, requiring transfer of components from the old to the new unit.
Procedure for removing the seal and sealing ring, involving disassembly of casing parts.
Troubleshooting late bag change indicator response, including screw adjustment or bag replacement.
Troubleshooting steps for a vacuum that won't switch on, covering switches, electronics, cord reel, and motor.
Troubleshooting fuse trips caused by high starting current, suggesting lower power settings or new electronics.
Detailed diagnostic steps for electronic issues, involving checking resistance and continuity at various connection points.
Troubleshooting low suction power, covering causes like jammed bags, blocked hoses, clogged filters, and incorrect seals.
Troubleshooting an appliance that always operates at full power, due to defective handle electronics or poor contact.
Diagnosing why the appliance cannot be switched on, related to handle electronics or slip ring contact issues.
Troubleshooting early bag change indicator response, often caused by fine dust clogging filter pores.
Diagnosing appliance shutdown due to overheating or blockages in the floor attachment or suction hose.
Troubleshooting issues with adjusting the power level, often caused by defective handle electronics or poor contact.
Addressing the inability to select the electrobrush, linked to defective handle electronics or poor contact.
To Next Page
