Replacing the exhaust filter
Always change the ACTIVE HEPA filter
when the filter change indicator (Reset
button 7) lights up. It is designed to
light up after approximately 50 hours of
operation which is about a year of
average use. The vacuum cleaner can
still be used with the exhaust filter
indicator lit. However, the suction power
will be reduced as will the effectiveness
of the filter if it is not replaced.
You can replace the "ACTIVE HEPA"
filter supplied with the cleaner with a
"SUPER air clean" or an "ACTIVE air
clean" filter if you wish (see "Replacing
one type of filter with another").
Maintenance and care
33
To Next Page
Loading...
