Height adjustment
You can adjust the height of two of the
four brush rolls on the powerbrush.
^ Step on the Height adjustment foot
pedal as shown until the desired
brush roll height is shown in the
display:
Level 1 = shortest distance from
the floor
Level 5 = highest distance from
the floor
Releasing the intake socket /
Turning the powerbrush on
^ Step on the Lock release pedal and
release the intake socket. The
powerbrush is turned on.
If you return the intake socket back to
the vertical start position while
vacuuming, the powerbrush will be
turned off.
en - Use
9
To Next Page
Loading...