en-US
21
Insert new thread catchers.
Cleaning (Fig. 37) the roller on the
floor brush AllTeQ
Release the roller pin using a coin.
Push out the pin and remove it.
Remove the roller.
Remove any threads and hair, replace
the roller and refit the pin, locking it
back into position.
Replacement parts are available from
Miele.
Cleaning and care
Always disconnect the vacuum
cleaner from the electrical supply be‐
fore cleaning it. Turn off and unplug
it.
Vacuum cleaner and accessories
The vacuum cleaner and all plastic ac‐
cessories can be cleaned with a propri‐
etary cleaner suitable for plastic.
Do not use abrasive cleaning
agents, glass cleaning agents, all-
purpose cleaners or oil-based condi‐
tioning agents!
Dust compartment
The dust compartment can, if necessa‐
ry, be cleaned using a dry duster, brush
or, if available, a second vacuum clean‐
er to vacuum the dust out.
Monitor the filter bag change indicator
and inspect all filters regularly. Clean or
replace them when necessary accord‐
ing to these Operating Instructions.
Do not let the vacuum cleaner
get wet. If moisture gets into the ap‐
pliance, there is a risk of electric
shock.
To Next Page
Loading...
Need help?
General
