Miele T 8822 C User Manual

Problem Possible cause Remedy
The Start/Stop button is
flashing slowly and the
display is dark.
The dryer is in Standby
mode.
This is quite normal and
not indicative of any fault.
See "Programmable
functions".
Sometimes a program
-
me cannot be started
and the corresponding
programme indicator
light does not light up.
No obvious cause.
–
Switch the dryer off
and back on again.
–
Select one of the
programmes that
would not start.
–
If it still will not start,
there is a fault. Contact
the Miele Service
Department.
The Start/Stop button
flashes on and off.
The flashing indicates
that a programme can be
started.
After the programme has
started, the flashing will
change to a constant
light.
Problem solving guide
35

Miele T 8822 C Specifications

General

Brand	Miele
Model	T 8822 C
Category	Dryer
Language	English