Memory function
The electronics will memorise any
extra options selected for a program
-
me. The duration selected for the
Warm air or Cool air timed drying
programmes will also be stored in
memory.
These settings will be selected
automatically the next time the pro
-
gramme is chosen. You can either
accept these or change them by
pressing the appropriate button.
Follow the steps (A,B,C ...) to pro
-
gramme and store in memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door is closed.
A Press the Start/Stop button and keep
it pressed in whilst carrying out steps
B-C.
B Switch the dryer on.
Wait until the Start/Stop button lights up
constantly ...
C . . . and then release the Start/Stop
button.
D Press the Low temperature button
seven times.
–
The Low temperature indicator light
will flash 9 times briefly.
A number to show which option is
selected will appear in the display
alternating with the letter P.
0 Memory deactivated
(factory default setting)
I Memory activated
(the Automatic plus indicator light will
also flash)
E Pressing the Start/Stop button
switches between the options.
F Switch the dryer off.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check the setting:
^ Carry out steps A to D.
^ Switch the dryer off after step D.
Programmable functions
58
To Next Page
Loading...
