Keypad tone
An audible tone sounds each time a
button is pressed.
Follow steps (A,B,C ...) to
programme and store in memory.
Before you begin, first ensure that:
–
The dryer is switched off.
–
The door is closed.
A Press the Start/Stop button and keep
it pressed in whilst carrying out steps
B-C.
B Switch the dryer on.
Wait until the indicator light for the
Start/Stop button lights up constantly
...
C . . . and then release the Start/Stop
button.
D Press the Low temperature button
nine times.
– The indicator light Low temperature
will flash on and off slowly once and
will then flash on and off quickly
once.
The option selected will be displayed
by a number which will alternate with
P.
0 Default setting. Keypad tone
deactivated.
I Keypad tone activated
(The Automatic plus indicator light
will also flash.)
E Pressing the Start/Stop button
switches from one to the other.
F Switch the dryer off.
The settings have been changed. You
can alter the settings again at any time.
Control
^ Repeat steps A to D.
^ Switch the dryer off after step D.
Programmable functions
60
To Next Page
Loading...
