Cleaning and care
43
Cleaning the plinth filter
Clean the plinth filter whenever the
indicator light comes on or when the
programme duration is longer than
usual.
To turn the indicator light off:
Open and close the door while the
dryer is switched on.
Removing the plinth filter
Press the round, indented area on the
heat exchanger access panel to open
it.
The panel will spring open.
Pull the plinth filter out by the handle.
Removing the plinth filter will cause the
right hand guide pin in the dryer to
come out. This pin ensures that the
heat exchanger access panel can only
be closed if the plinth filter is inserted
the right way round.
To Next Page
Loading...
Need help?
General
