Before using for the first time
24
Switching on the tumble dryer
Turn the programme selector to the
Cottons programme.
The welcome tone will sound and the
welcome screen will light up.
Setting the language
You will be asked to select the language
you require for the display. It is possible
to change the language at any time by
setting the programme selector to the
Further programmes/ position in the
Settings sub-menu.
Touch the sensor until the lan-
guage you want appears in the dis-
play.
Confirm your selection of the lan-
guage by touching the OK sensor.
Setting up Miele@home
The following message appears in the
display:
Miele@home
Touch the OKsensor control.
To set up Miele@home now:
Touch the OK sensor control.
To postpone setup until later:
Touch the sensor control until Set
up later appears in the display and
press OK to confirm.
The following selection options appear
in the display:
1. Connect via WPS
2. Connect via App
Select the required connection type.
You will then be guided by the display
and the Miele app.
Before installing the tumble dryer in
its final location, check that the sig-
nal strength from your WiFi network
is sufficient.
To Next Page
Loading...
Need help?
General
