To Next PageTo Next Page
Need help?Do you have a question about the Miele T300 and is the answer not in the manual?
General| Appliance type | Freestanding |
|---|---|
| Drying technology | Heat pump |
| Color | White |
| Type | Tumble dryer |
| Loading type | Front loading |
| Dimensions (HxWxD) | 850 x 595 x 580 mm |
Details on the air-cooled condenser dryer features, including reversing motion and air circulation.
Specifies the height, width, and depth of the T300 series clothes dryer.
Details on voltage, load, fuse rating, and supply lead for German standard models.
Lists available drying programs for various T300 models, including special cycles.
Guidance for installing the appliance as a free-standing unit, ensuring it is level.
Instructions for building the appliance under a worktop, including kit requirements.
Procedure for connecting the drain hose for condensate removal to the rear.
Explanation of how the EF 102 unit electronically monitors and controls drying stages.
Describes the function of the level switch and its role in condensate overflow detection.
Steps to open the front panel and overview of electrical components for various models.
Detailed instructions for removing and replacing the heater bank for different machine serial numbers.
Step-by-step guide for replacing the drum drive belt, including different machine series.
Procedures for replacing drum seals and bearing shells, including part numbers.
Information on locating and replacing electronic modules, specifically EF 102.
Guide for checking sensor controls, including possible fault causes and test procedures.
Procedures for testing residual moisture stages using specific testers and settings.
Instructions for verifying the proper operation of the level switch.
Identifies common leak points, possible causes, and remedies for the condenser dryer.
Diagnoses common issues like laundry not drying, drum failure, or program sequence faults.
