Energy saving tips
17
This dryer with heat pump technology
is designed for energy-saving drying
cycles. However, you can save a little
more energy with the following
measures as the drying time is not
extended unnecessarily.
- Make sure your laundry is spun at the
maximum spin speed in the washing
machine before drying.
The higher the spin speed, the
greater the savings that can be made
in energy and time during drying, e.g.,
approx. 20% energy can be saved if
spun at 1,600rpm instead of
1,000rpm.
- Load according to the optimum
amount of laundry recommended for
the drying program being used. This
will mean that the energy
consumption for the amount of
laundry is at its most economical.
- Make sure that the room temperature
is not too high. If there are other heat-
producing appliances in the room in
which the dryer is located, make sure
the room is well ventilated and switch
the other appliances off.
- Clean the lint filters in the door
opening after every drying cycle.
To Next Page
Loading...
Need help?
General
