Miele TWB120WPT1 User Manual

3. Selecting a program and starting it
26
Starting a program
 Touch the flashing Start/Stop sensor
button.
The Start/Stop sensor button will light
up.
Notes
If a delay start time has been selected,
this will count down on the time display.
At the end of the delay start time or
immediately after the program has
started, the program duration will
appear in the time display.
With a longer delay start time, the drum
will rotate occasionally to untangle the
laundry. This is not a fault.
- The Perfect Dry indicator will only
flash/light up with programs with
selectable drying levels (see also
“Operating the tumble dryer”).
- This dryer measures residual
moisture content in the laundry to
ensure perfect drying results.
However, if you load the dryer with
little or dry laundry, it will be dried/
aired for a set duration. In this case,
Perfect Dry does not light up at the
end of the program.
 Avoid over-drying laundry and
garments.
Otherwise they can wear out!
Energy savings
After 10minutes, the indicators dim and
the Start/Stop sensor button starts
flashing.
 Touch the Start/Stop sensor button to
switch the indicators on again (this
does not have any effect on a running
program).
- Before the program finishes, the
laundry is cooled.

Miele TWB120WPT1 Specifications

General

Brand	Miele
Model	TWB120WPT1
Category	Dryer
Language	English