Miele TWH620WP - Programmable Functions; Programming

Programmable functions
73
Programming
You can use the programmable func-
tions to alter the dryer's electronics to
suit your requirements.
Programming is carried out by following
these steps (, ,  ... ) using the
sensor controls.
Accessing the programming level
Before you begin:
– The dryer must be switched on and a
programme selected.
– Make sure that the door of the dryer
is open.
 Touch the Start/Stop sensor and
hold it down whilst carrying out
steps -.
 Close the dryer door.
 Wait until the Start/Stop sensor,
which will now be flashing quickly,
lights up constantly ...
 ... and then release the Start/Stop
sensor.
 will light up on the time display.
Choosing and selecting a program-
mable function
The number of the programmable
function will appear in the time display
as  and a number:
e.g. .
 Touch the  or  sensor to scroll to
the next or previous programmable
function:
Programmable function
 Cotton drying levels
 Minimum iron drying levels
 Extended cool down
 Buzzer volume
 Keypad tone
 Lock code
 Conductivity
 Control panel standby status
 Dryer switch-off status
 Memory
 Anti-crease
 Buzzer active
 Airways indicator
 Backlight brightness dimmed
 Confirm the selected programmable
function by touching the Start/Stop
sensor.