Before using for the first time
26
Setting up Miele@home
Skip
Continue
Set up “Miele@home”?
To set up Miele@home now: touch
the Continue sensor control.
Tip: To postpone setup until later: touch
the Skip sensor control. The following
message will then appear in the display:
It is possible to set up later in “Settings” /
“Miele@home”.
Confirm with the OK sensor control.
Via WPS Via App
Which connection method do you
want to use?
Select the connection method you
wish to use.
You will then be guided by the display
and the Miele app.
You will require a WPS-compatible
router for the Via WPSconnection type.
Activate the WPS function on your
router within 2minutes.
Setting the clock format
The time of day can be displayed as a
24 hour or 12 hour clock.
Select the clock format you want and
confirm this with the OK sensor.
The display will change to the next set-
ting.
Setting the time of day
This message only appears if the
tumble dryer has not yet been con-
nected to a WiFi network.
The time of day is set automatically if
connection is established with a WiFi
network.
OK
12 00
11 59
10 58
13 01
14 02
Clock display
Place your finger on the number that
you want to change and move your
finger in the direction you want.
Confirm with the OK sensor.
The display shows further information.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
