Miele TWR 780 WP User Manual

Problem solving guide
66
Many malfunctions and faults that can occur in daily operation can be easily
remedied. Time and money will be saved because a service call will not be
needed.
The following guide may help you to find the reason for a malfunction or a fault,
and to correct it.
Fault messages shown in the display when a programme is
cancelled
Message Cause and remedy
 Clean the fluff filter.
Check the airways.
The system has been clogged by fluff or detergent
residue.
 To deactivate the message, confirm with OK.
 Clean the fluff filters and the plinth filter.
Please see “Cleaning and care” for notes on clean-
ing.
The fluff and/or plinth filters are damaged or out of
shape.
 Check the fluff filters and the plinth filter. Replace
them if necessary.
The fluff and/or plinth filters are clogged. It is no
longer possible to clean them.
 Check the fluff filters and the plinth filter. Replace
them if necessary.
“Problem solving guide – Replacing the plinth filter”
contains information about when a plinth filter that
is no longer in good working order has to be re-
placed.

Miele TWR 780 WP Specifications

General

Door color	Chrome
Door hinge	Left
Cord length	2 m
Control type	Buttons, Touch
Loading type	Front-load
Drying system	Heat pump
Product color	White
Reversible doors	Yes
Appliance placement	Freestanding
Cycle time	220 min
Noise level	62 dB
Drying class	A
Drum capacity	9 kg
Refrigerating medium	R134a
Number of drying programs	20
Self-cleaning	-
Delay start (max)	24 h
Near Field Communication (NFC)	No
Current	10 A
Heat source	Electric
Connected load	1100 W
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Energy consumption	1.47 kWh
Energy efficiency scale	A+++ to D
Annual energy consumption	174 kWh

Weight and Dimensions

Depth	643 mm
Width	596 mm
Height	850 mm
Weight	62000 g
Depth with door open	1077 mm