Miele TWR 780 WP User Manual

Problem solving guide
77
Remove the spray jet (optional ac-
cessory). Replace the spray jet.
You can only replace the spray jet us-
ing a special tool. The special tool is
supplied with the new spray jet.
 Using the wrong tool can cause
damage.
Doing so can damage the spray jet
or the tumble dryer.
Only use the tool supplied. Do not
use any other tool.
 Open the tumble dryer door.
The spray jet is located in the top left of
the door opening.
 Attach the tool to the spray jet.
 Turn the tool anti-clockwise to un-
screw the spray jet.
 Insert the new spray jet into the tool.
 Turn the tool clockwise to screw the
spray jet securely in position.
The tumble dryer must not be oper-
ated without the spray jet fitted.

Miele TWR 780 WP Specifications

General

Door color	Chrome
Door hinge	Left
Cord length	2 m
Control type	Buttons, Touch
Loading type	Front-load
Drying system	Heat pump
Product color	White
Reversible doors	Yes
Appliance placement	Freestanding
Cycle time	220 min
Noise level	62 dB
Drying class	A
Drum capacity	9 kg
Refrigerating medium	R134a
Number of drying programs	20
Self-cleaning	-
Delay start (max)	24 h
Near Field Communication (NFC)	No
Current	10 A
Heat source	Electric
Connected load	1100 W
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Energy consumption	1.47 kWh
Energy efficiency scale	A+++ to D
Annual energy consumption	174 kWh

Weight and Dimensions

Depth	643 mm
Width	596 mm
Height	850 mm
Weight	62000 g
Depth with door open	1077 mm