When to change the battery in
the radio-operated handle
Approx. every 18 months. One 3 V
battery (CR 2032) is required.
How to change the battery in
the radio-operated handle
^
Open the cover to the battery
compartment using a screwdriver.
^
Replace with a new battery, making
sure the polarity is correct.
^
Replace the cover.
^ Dispose of the old battery
responsibly.
The vacuum cleaner can still be
used when the battery has run out or
if there is no battery fitted.
^ Switch the vacuum cleaner on using
the On/Off foot control s. The
Stand-by indicator - on the vacuum
cleaner will light up yellow.
^
Press the restart button on the
vacuum cleaner.
The vacuum cleaner can continue to be
used, but only at maximum power.
Cleaning the roller on the floorhead
(Not necessary for the AirTeQ
floorhead)
a Release the bearing (with bayonet
fitting) using a coin.
b Press the bearing out, and remove it.
c Take out the roller.
^
Remove any threads and hair,
replace the roller and refit the
bearing.
Maintenance and care
33
Allergy Cosmos | Tel: 0800 0148 667 | Web: www.AllergyCosmos.co.uk
To Next Page
Loading...
