Why is the display dark on my Miele W 1611?
If your Miele Washer's display is dark, it might have automatically switched off to save energy using Standby mode. To resolve this, simply press any button to exit Standby mode and reactivate the display.
What to do if my Miele W 1611 Washer programme does not start?
If your Miele Washer isn't starting, first, ensure that the mains plug is properly plugged in and switched on. Also, check if the fuse or circuit breaker has tripped.
Crucial safety advice to prevent accidents and machine damage before first use.
Guidelines for environmentally friendly disposal of packing materials and the old washing machine.
Specifies correct appliance application and essential safety measures for children.
Ensures electrical safety compliance and safe practices for repairs and maintenance.
Advice on installation conditions and safe operational practices to prevent hazards.
Precautions for washing textiles treated with cleaning agents and using dyes.
Detailed explanation of the washing machine's control panel layout and button functions.
Details on display content, programme duration, and introduction to programmable functions.
Steps for initial setup, language selection, transport strut removal, and running the first wash.
Tips for optimizing energy and water consumption, and correct detergent dosage.
Instructions on sorting laundry by colour and care labels, and preparing items for washing.
Proper techniques for loading laundry and selecting wash programmes, temperature, and spin speed.
Explanation of selectable extra options like Water plus, Pre-wash, and Buzzer for enhanced washing.
Guidance on dispensing the correct amount of detergent into the designated compartments.
How to start a wash and safely remove laundry after the cycle concludes.
Details on selecting final spin speeds and options to omit rinse or spin cycles.
Information on specific wash programmes, fabric types, temperatures, and load limits.
Details on additional programmes like Automatic, Shirts, Denim, Dark Garments, and Spin.
Table summarizing which extra options are compatible with each wash programme.
Explanation of common garment care symbols related to washing, ironing, and bleaching.
Overview of water levels, wash rhythms, and spin stages across different programmes.
Details on how the machine adjusts for load size and the function of the anti-crease feature.
Instructions for cancelling, interrupting, or altering programme parameters after starting.
Procedure for adding laundry mid-cycle and managing the safety lock feature.
Guidance on selecting detergents for whites, colours, and delicates.
Factors for correct detergent dosage and the use of water softeners.
Information on fabric conditioners, starch, and precautions for using dyes.
Instructions for cleaning the machine's exterior and the detergent dispenser drawer.
Steps for cleaning the siphon tube, conditioner channel, and detergent dispenser housing.
Procedure for cleaning the filters in the inlet hose and water inlet valve.
Diagnosing and fixing issues when the programme does not start or the display is dark.
Guide to understanding and resolving common fault messages shown on the display.
Solutions for general problems like shaking, poor spinning, detergent residue, or language settings.
Fixing common wash quality problems like poor cleaning, grey residue, or creased clothes.
Steps to troubleshoot and open the drum door when it fails to unlock.
Procedure for draining the machine and manually opening the door during blockages or power failures.
How to manually open the drum door using the emergency release mechanism after draining.
Details on contacting Miele service, appliance guarantee, and optional accessories.
Diagram and labels identifying key components visible from the front of the washing machine.
Diagram and labels identifying key components and connection points from the rear.
Advice on choosing an installation surface and the procedure for removing transit fittings.
Guidance on securing transit bars for safe machine transport and storage.
Steps to ensure the machine is perfectly level and stable during operation.
Information on installing under worktops and stacking with a tumble dryer.
Explanation of the three main components designed to protect the machine from water damage.
Instructions for connecting to the mains water supply, including pressure and hose requirements.
Details on correctly connecting the drain hose to various drainage points.
Guidelines for safe electrical connection, earthing, RCD installation, and plug accessibility.
Table detailing energy, water consumption, and programme durations for various wash cycles.
Instructions on how to access, select, and modify programmable functions.
Guide to changing the machine's display language and understanding the flag indicator.
Explanation of Water plus settings, Gentle action feature, and the Suds cooling function.
Instructions for activating, deactivating, and using the code lock for machine security.
Configuration options for temperature units, buzzer volume, display brightness, and contrast.
Settings for standby display, memory function for saved preferences, and anti-crease feature.
Contact information for Miele Australia, New Zealand, and Germany for support and service.
To Next Page
General
