Programme chart
32
Proofing 40°C Max. load 2.5 kg
Use for Treating microfibre fabrics, skiwear, and table linen made from
mainly synthetic fibres to provide a water and stain resistant finish.
Notes
–
The items should be freshly laundered and spun or dried before
proofing.
– For best results, the items should be heat-treated afterwards,
either in a tumble dryer or by ironing.
Separate rinse Max. load 7.0 kg
Use for Rinsing handwashed items.
Note – Reduce the spin speed for fabrics which crease easily.
Starch Max. load 7.0 kg
Use for Starching table cloths, serviettes and workwear
Notes
–
Reduce the spin speed for fabrics which crease easily.
–
The laundry should be washed but not treated with fabric
conditioner.
Outerwear cold to 40°C Max. load 2.5 kg
Use for Outerwear made from membrane fabrics such as Gore-Tex
®
,
SYMPATEX
®
, WINDSTOPPER
®
etc.
Notes
–
Zip up jackets before washing.
–
Do not use fabric conditioner.
–
If wished these garments can also be re-proofed using the
Proofing programme. Proofing should not be done every time
the garment is washed.
To Next Page
