Need help?Do you have a question about the Miele W 2653 WPS and is the answer not in the manual?
Guidelines for correct and safe operation, intended use, and user supervision for the washing machine.
Safety checks before setup and connection, including electrical safety and earthing requirements.
Detailed explanation of the washing machine's control panel buttons and indicators.
Explanation of the display's functions, selected programmes, time display, and button operations.
Steps to run the initial wash programme, including selecting 'Cottons Universal'.
Procedure to calibrate the load size sensor to zero after the first programme run.
Steps for switching on the machine and selecting a wash programme via the control panel.
Instructions on how to load the drum, including the load size indicator and ensuring proper door closure.
Guidance on adding detergent based on display recommendations and load size.
Instructions for starting the wash programme and removing laundry safely after completion.
Table showing maximum spin speeds for programmes and how to adjust them.
Troubleshooting steps for when the programme fails to start, covering power, display, and lock issues.
Explanation of common fault messages (DRAIN FAULT, INLET FAULT, WPS ACTIVATED, etc.) and their remedies.
Solutions for issues with the load size indicator, including recalibration and error messages.
Solutions for poor wash results due to incorrect detergent use or residues on textiles.
Reasons why the drum door may not open and how to resolve them, including power and lock issues.
Steps to drain water from the machine during a blocked drain or power failure, including safety precautions.
Procedure for removing, cleaning, and replacing the fluff filter and checking the impeller.
How to use the emergency release lever to open the drum door manually.
Guidance on selecting a suitable installation surface, considering stability and vibration.
Steps for manoeuvring the machine to its installation site and general handling precautions.
Detailed procedure for removing the left and right transit covers and fittings from the machine.
Instructions on using the supplied spanner to turn and withdraw the transit bars.
How to refit transit bars for moving the machine and secure the protective covers.
Importance and procedure for levelling the machine on its four adjustable feet for stable operation.
Detailed steps on adjusting the machine's feet using the spanner and checking counter nuts.
Detailed explanation of the three main components protecting against water damage: inlet hoses, housing, and drain hose.
General guidance and diagrams for connecting the machine to the water supply, emphasizing the safety valve.
Requirements for connecting to the mains water supply, including stopcocks, pressure, and plumbers.
Specifics for connecting the cold water supply using the inlet hose with blue dots.
Methods for connecting the drain hose, including direct to sink, drain pipe, standpipe, or floor gully.
Instructions for electrical connection, voltage, plug rating, safety regulations, and RCD installation.
Guide to connecting wires (green/yellow, blue, brown) to the correct plug terminals (E, N, A).
To Next Page
General
