Control panel
a Display
See the following page for more
information.
b Start button
– For delaying the start of a
programme
– Starts the wash programme
c Extra option buttons
Extra options can be added to the
basic programme.
Use the top button to select either
the Short, Pre-wash,orSoak option.
Use the lower button to select the
Water plus option.
Indicator light on = option selected
Indicator light off = option not
selected
d Indicator lights for spin speed,
Rinse hold or Without spin.
e Spin button
For selecting the final spin speed,
Rinse hold or Without spin.
f Programme selector
For selecting the wash programme
and temperature for that programme.
The programme selector can be
turned clockwise or anti-clockwise.
g Programme sequence indicator
lights
Show which section of the wash
programme has been reached.
h Maintenance/check lights
i Button K
For switching the washing machine
on and off.
To save energy, the washing
machine will switch itself off
automatically 15 minutes after the
end of the programme/anti-crease
phase or after being switched on, if
no other selection is made.
j Door button
Opens the machine door.
Operating the washing machine
13
To Next Page
Loading...
