Water intake
You can choose between cold water
and cold and hot water intake.
Cold water
(Delivery status)
The washing machine is exclusively run
with cold water.
Hot water MW
To save energy, the main wash cycle
uses warm water when the temperature
is set to 40°C or higher.
Exemption: The Woollens programme
only uses cold water.
Warm water should be generated by
low-priced energy such as gas, solar
energy or oil. The temperature should
be lower than 60°C.
,
According to technical and
hygienic guidelines, the inlet hose
with the silver label must always be
connected to the cold water supply.
Settings
83
To Next Page
