Standby display
To save energy, the display and the
lights will go out and the indicator
light for the Start button will start
flashing slowly.
The display will always go out
–
if a programme is not selected within
10 minutes of the machine being
switched on.
–
10 minutes after the end of a
programme.
Pressing one of the buttons switches
the display and the lights back on
again.
You can also choose whether the
display and the lights remain on or off
during the course of a programme.
On
The standby function is switched on .
The display and the lights will be
switched off 10 minutes after the start of
the programme.
Not in current programme
(the machine is delivered with this
option selected as standard)
The standby function is switched off.
The display and the lights remain
switched on during the course of the
programme.
Memory
If an Extra option has been selected
for a programme, or the
recommended temperature or spin
speed has been altered, the machine
will store the changes in memory at
the start of a programme.
When this programme is chosen again,
these settings will appear in the
display.
The machine is delivered with the
memory function deactivated.
Anti-crease
Anti-crease helps prevent creasing if
the laundry is not normally removed
immediately after the end of a
programme.
The drum will continue to rotate for up
to 30 minutes after the programme end.
The washing machine door can be
opened at any time.
On
(the machine is delivered with this
option selected as standard)
Anti-crease is activated.
Off
Anti-crease is deactivated.
Settings menu
71
To Next Page
Loading...
Need help?
General
