Need help?Do you have a question about the Miele W 827 and is the answer not in the manual?
General| Loading type | Front-loading |
|---|---|
| Load Capacity | 5 kg |
| Maximum spin speed | 1400 RPM |
| Water Consumption | 49 l |
| Programs | Delicates, Wool |
| Spin Speed | 1400 rpm |
Guidelines for environmentally friendly disposal of transport and protective packing materials.
Instructions for recycling old appliances and ensuring child safety during storage.
Diagram and labels identifying external parts of the washing machine.
Explanation of buttons, indicators, and the programme selector on the control panel.
Guidelines for using the machine with specified textiles and avoiding improper operation.
Electrical safety, earthing requirements, and connection advice for safe operation.
Covers maritime use, freezing, flooding risks, and foreign object hazards.
Guidelines for using approved accessories and safe disposal of old appliances.
Steps to flush residual lubricants and water before the first wash cycle.
Setting the dial in the dispenser drawer to remember water hardness level.
Overview of the operating sequence for washing, using numbered steps.
Sorting laundry, checking pockets, and pre-treating stains for optimal washing.
Advice on loading the drum for best results, including maximum load weights.
Instructions on how to close the washing machine door properly.
Ensuring the water stopcock is open before starting a wash programme.
Reference to the section on detergent for detailed instructions.
How to choose and activate options like Soak, Pre-wash, Short, and Water plus.
Choosing spin speed, Rinse hold, or Without final spin.
How to initiate the washing cycle after all selections are made.
Turning off the water stopcock after the programme has finished.
Closing the door to prevent items being placed inside inadvertently.
Safely removing laundry once the drum has stopped turning.
Checking the door seal folds for any small items left behind.
Conditions under which the door cannot be opened during a running programme.
How to pause and resume a wash programme using the I-ON/0-OFF button.
Making changes to temperature or options during a running programme.
Method for skipping a wash cycle stage by adjusting the programme selector.
Table explaining water hardness ranges and their German equivalents.
Consequences of using too little or too much detergent for optimal results.
Advice on using water softeners like Calgon and recommendations for their application.
Information on using fabric conditioners, texturisers, and starch for garment care.
Instructions for automatic and separate use of fabric conditioners, texturisers, and starch.
Detailed table of programmes, fabrics, temperatures, and maximum spin speeds.
Overview of available additional options for various programmes and their notes.
Detailed sequence of operations for Cottons, Minimum Iron, Delicates, and Woollens programmes.
Sequence details for Quick Wash, Starch, Spin, Separate Rinse, and Mixed Wash programmes.
Explanation of care symbols for washing textiles and corresponding programmes.
Guides for Hand wash, Dry clean, Bleaching, Tumble dry, and Ironing symbols.
Using the Soak option for heavily soiled items, including time programming.
Using the Pre-wash option for heavily soiled and stained items.
Shortening programme time for normally soiled items, with specific rinse details.
Details on Water plus, Spin, Without final spin, and Rinse hold options.
How to activate, deactivate, and check the electronic programme locking function.
Programming the machine to use a maximum water level for rinsing.
Configuring the four Water plus options for increased water levels or extra rinses.
How to save selected programmable options into the machine's memory.
Programming to use the additional compartment for detergent, especially for hard water.
Customizing the soak time duration for programmes, from 30 mins to 2 hours.
Programming the 'Gentle action' feature for reduced drum action on lightly soiled items.
Activating a top-up rinse for Cottons programmes to cool suds or protect pipes.
Managing the machine's memory function for storing programme changes and options.
Instructions for cleaning the casing, facia panel, lid, and drum with mild cleaners.
Performing hot washes periodically to prevent deposits and unpleasant smells.
Information on using the microfibre E-Cloth for cleaning various surfaces.
Steps for removing and cleaning the detergent dispenser drawer and its components.
Procedure for checking and cleaning the fluff (drain) filter and pump, including water drainage.
Cleaning the filter housing, checking the impeller, and securing the filter after cleaning.
Steps to clean the filter located in the union of the water inlet hose.
Procedure for cleaning the filter within the machine's water inlet valve.
Diagnosing and resolving problems when the wash programme fails to initiate.
Troubleshooting when the programme halts and an indicator light signals an error.
Addressing fault lights that appear while the wash programme continues unaffected.
Resolving issues causing the machine to shake or vibrate heavily during the spin cycle.
Troubleshooting why laundry is not spun dry enough or is still too wet.
Diagnosing why the drum door fails to open and potential causes like power failure.
Understanding normal operational noises from the pump and potential causes.
Troubleshooting issues with detergent not dispensing fully or remaining in the drawer.
Resolving problems with fabric conditioner not dispensing or excess water in the compartment.
Ensuring liquid detergents provide the required cleaning results, especially for stains.
Addressing issues of greasy particles on laundry due to insufficient detergent or poor cleaning.
Resolving white residues from detergent (zeolites) on dark fabrics, suggesting alternatives.
Procedure to verify the water supply pressure meets operational requirements.
Details for contacting Miele dealers or service departments for assistance.
Information regarding the appliance's warranty period and terms.
Explanation of the PC indicator light for future technological updates by service engineers.
Recommendations for stable and vibration-resistant installation surfaces.
Step-by-step guide to removing transit bars before initial use.
Instructions for re-installing transit bars when moving the machine.
Ensuring the machine stands level on all four feet for safe and proper operation.
Detailed steps for adjusting the machine's feet using nuts and a screwdriver.
Guidance for fitting under a worktop and stacking with a dryer, including required kits.
Instructions for connecting the machine to the mains water supply, including stopcock and hose requirements.
Methods for connecting the drain hose to sinks, basins, drain pipes, or gullies.
Guidelines for electrical connection in the UK, including plug wiring and RCD advice.
Information on BS 1363 plugs, fuse replacement, and disposal of cut cords.
To Next Page
