EasyManua.ls Logo

Miele W1-WMV 960 WPS User Manual

Miele W1-WMV 960 WPS
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operating instructions
for washing machines
To avoid the risk of accidents or damage to the machine, it is essential
to read these instructions before it is installed and used for the first time.
en-GB M.-Nr. 10 374 520

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Miele W1-WMV 960 WPS and is the answer not in the manual?

Miele W1-WMV 960 WPS Specifications

General IconGeneral
Loading typeFront-load
Capacity9 kg
Energy Efficiency ClassA
Spin Speed1600 RPM
Dimensions (H x W x D)850 x 596 x 643 mm
Noise Level (washing)46 dB
Noise Level (spinning)72 dB
Appliance typeWashing machine
TypeFront-loading
DisplayYes
Programs20
Detergent dispensingTwinDos
Water Protection SystemWaterproof System (WPS)

Summary

Warning and Safety instructions

Correct application

Details on the intended use and correct application of the washing machine.

Safety with children

Guidelines and precautions for ensuring the safety of children around the washing machine.

Technical safety

Ensuring safe operation through proper installation and electrical connections.

Operating the washing machine

Control panel

Overview and identification of the components of the washing machine's control panel.

Main menu

Navigating the primary menu interface to access various machine functions and settings.

Examples on how to operate the machine

Illustrative examples demonstrating common operating procedures and interactions.

Before using for the first time

Removing the detergent cartridges from the drum

Instructions for safely removing detergent cartridges prior to initial use.

Inserting detergent cartridges

Step-by-step guide for correctly inserting detergent cartridges into the machine.

Setting up the washing machine

Configuration steps for initial machine setup, including language and time settings.

Starting the calibration programme

Procedure for running the calibration programme for optimal performance.

Select programme settings

Temperature

How to adjust the wash temperature for selected programmes.

Spin speed

Instructions for modifying the spin speed according to laundry requirements.

TwinDos

Guidance on activating and configuring the automatic detergent dispensing system.

ProgrammeManager

Customizing wash programmes using the ProgrammeManager feature.

Options

Selecting and deselecting additional wash options to enhance programmes.

Switching on delay start

Setting a delayed start time for wash programmes.

CapDosing

Using special capsules for detergent dispensing with specific programmes.

Add detergent

TwinDos

Information on automatic detergent dispensing via the TwinDos system.

CapDosing

Details on using single-dose capsules for specific laundry needs.

Detergent dispenser drawer

Guidance on using the detergent dispenser drawer for manual detergent addition.

Start the programme - the end of a programme

Starting the programme

How to initiate a selected wash programme using the start/stop sensor.

At the end of a programme

Steps to take after the programme finishes, including unloading the laundry.

Garment care label symbols

Washing

Understanding washing symbols and their corresponding temperature and agitation levels.

Drying

Interpreting drying symbols for tumble drying temperatures.

Ironing

Guidance on ironing symbols and recommended temperatures.

Spinning

Final spin speed

Information on selecting and adjusting the final spin speed for programmes.

Rinse and interim spin

Details on rinse cycles and interim spins within programmes.

To omit the final spin (Rinse hold)

How to use the Rinse Hold option to prevent creasing.

Changing the programme sequence

Cancelling a programme

Procedure for stopping and cancelling an active wash programme.

Adding or removing laundry after the programme has started

Instructions for adding or removing items during the initial minutes of a programme.

Safety lock

Activating and deactivating the safety lock feature to prevent programme changes.

Problem solving guide

The programme does not start

Troubleshooting steps for when the washing machine fails to start.

The following fault messages appear in the display and the programme stops

Resolving errors indicated by fault messages that halt the programme.

The following fault messages appear in the display at the end of the programme

Troubleshooting messages that appear after a programme has concluded.

An unsatisfactory wash result

Diagnosing and resolving issues related to poor washing outcomes.

The door will not open

Steps to take if the washing machine door cannot be opened.

Installation and connection

Installation surface

Recommendations for selecting a suitable and stable installation surface.

Removing the transit bars

Instructions for removing transport safety devices before initial use.

Levelling the machine

Guidance on how to level the machine for optimal operation and stability.

Connection to the water supply

Procedure for connecting the washing machine to the water supply.

Connection to the drainage system

Instructions for correctly connecting the machine's drain hose.

Electrical connection U.K.

Details and safety requirements for the electrical connection in the UK.

Settings

Selecting and changing settings

How to navigate and modify various machine settings.

Language

Procedure for setting the display language of the washing machine.

TwinDos

Configuration options for the TwinDos automatic detergent system.

Detergent/amount

Adjusting detergent type and dosage amounts for the TwinDos system.

Degree of soiling

Setting the default degree of soiling or controlling the query.

Consumption

Checking saved energy/water consumption and entering energy costs.

Code

Activating, deactivating, or changing a user-defined code for machine access.

Optional accessories

Detergent

Overview of Miele detergents and fabric care products available.

UltraPhase 1 and UltraPhase 2

Information on Miele's two-component liquid detergent system.

Fabric care

Details on fabric care agents like softeners, reproofing agents, and additives.

Related product manuals