Miele WDA 101 - Suds Cooling

Programmable functions
64
Suds cooling
When this is activated, additional wa-
ter flows into the drum at the end of
the main wash to cool the suds down.
Hot suds can damage plastic drainage
pipes.
Suds cooling takes place when a tem-
perature of 90°C or higher is selected
for the Cottons programme.
Suds cooling should be activated:
– to prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin.
– where drainage pipes do not comply
with DIN 1986.
– The machine is delivered with Suds
cooling deactivated.
Follow steps  to  to programme
and store in memory.
The programmable functions are ac-
cessed via the Start button and the pro-
gramme selector.
Before you begin, ensure that:
– The washing machine is switched off.
– The machine door is closed properly.
– The programme selector is at Finish.
 Press the Start button and keep it
pressed in whilst carrying out steps
 to .
 Switch machine on with the  but-
ton.
 Wait until the indicator light for the
Start button lights up constantly . . .
 . . . and then release the Start button.
 Turn the programme selector to Cot-
tons 40°C
A  will flash in the display alternating
with the number  or .
 Pressing the Start button switches
the programmable function on or off.
If  flashes in the display alternating
with the number , the programmable
function is switched on. If  flashes
in the display alternating with the
number , the programmable func-
tion is switched off.
 Switch the washing machine off with
the  button.