Guide to the machine
Mains on Y switch
Mains off Z switch
Door 5 button
Key switch
Position A – Free access
At this operating level only those pro-
grammes can be started which have
been allocated free access.
See Programming Instructions for
allocation of free access.
Position B - Operation
All programmes can be started at this
operating level. The display field will
show the programme which corresponds
to the setting to which the programme se-
lector has been turned.
Position C - Programming
In this position programming, copying,
deleting, altering, printing out, giving or
barring free access and creating new pro-
gramme sequences can be carried out.
See Programming Instructions.
Position D - Unlocking
At this operating level barred pro-
grammes can be unlocked. Locked Pro-
grammes (e.g. Disinfection programmes)
can not be cancelled once they have
started.
If the key switch is turned to position D in
such a programme, the programme run-
ning is unlocked and can be cancelled.
See Programming Instructions.
Keys for the key switch
Key 1 (2 supplied) for operating levels A
and B.
Key 2 for operating levels
A, B, C.
Key 3 for operating levels
A, B, C, D.
PROGRAMME 1 TH-Disinfection
>95°C<Main wash 1
Rinses 3 1000 RPM
à
Display
The Display content shows after the ma-
chine is switched on. It shows which pro-
gramme has been selected in 4 lines
each 40 digits long.
After Programme start:
Required temp. and name of current prog. block
Programme number Programme name
PROGRAMME 1 TH-Disinfection
60°C Pre-wash 25°C
95°C Main wash
à
Actual temp.
Required temp. and name of
following prog. block
Time line for current prog. block
Points to a further display line
1 2 3
9 M.-Nr. 05730940
To Next Page
Loading...
