To Next PageTo Next Page
Need help?Do you have a question about the Miganeo Speed Clean 7000 and is the answer not in the manual?
Instructions on handling and keeping the user manual for future reference.
Details the specific purpose and limitations for which the device is designed.
Defines various symbols used within the manual for clarity.
General overview of safety precautions and warnings applicable to the device.
Specific warnings and precautions regarding electrical safety and potential hazards.
Guidelines for safe operation concerning people, especially children and vulnerable individuals.
Requirements and considerations for selecting a suitable and safe installation site for the device.
Lists and briefly describes the different operational modes available on the filter system's valve head.
Describes the primary mode for filtering pool water.
Explains the mode used for rinsing the valve head after backwashing or initial setup.
Details the mode for circulating water without filtering, often after chemical treatment.
Describes the process of cleaning the filter medium using reverse water flow.
Explains the mode used to stop water flow, for prefilter cleaning or leak checks.
Describes the mode for draining dirty water, typically for heavy soiling or pool cleaning.
Details the mode for storing the filter system during winter to protect components.
Explains how to use the integrated timer to automate pump operation.
Provides guidance on the recommended duration for circulating pool water daily.
Lists essential checks to perform before the initial operation of the filter system.
Step-by-step instructions for securely attaching the pump to its base plate.
Procedures for setting up and activating the timer for the first time.
Instructions on how to ready the filter vessel, including adding filter media.
Instructions on how to choose the desired operational mode via the valve lever.
Procedure for powering on the pump and initial checks.
Guidance on maintaining the filter system and ensuring water quality.
Detailed steps for performing the backwash cycle to clean the filter.
Instructions on how to replace the filter sand or filter balls.
Guide for changing the battery that powers the integrated timer.
Recommendations for cleaning the device safely and effectively.
Specific instructions for preparing and storing the filter system for winter.
Instructions for environmentally responsible disposal of packaging materials.
Guidelines for the proper disposal of the device at the end of its life cycle.
General| Filtration Technology | Sand filtration |
|---|---|
| Type | Water Filtration System |
| Pump capacity | 7000 liters/hour |
| Voltage | 220-240V |
| Power Supply | Electric |
