To Next PageTo Next Page
Need help?Do you have a question about the Mighty Mule MM560 and is the answer not in the manual?
Defines classes for gate operators, from residential to industrial.
Procedures for disconnecting and manually operating the gate.
Verify gate suitability, installation compliance, and system familiarity.
Ensure safe operator placement, avoid pinch points, and use sensors.
Attach warning signs, manage access, and maintain safety.
Details on Dual Sense Technology, sensing edges, and entrapment alarms.
Requirements for warning signs and separate pedestrian access.
Covers warning labels, manual operation, and system maintenance.
Information on motor, screw drive, and opening arc.
Details on battery, transformer, and solar panel power sources.
Microprocessor control, DIP switches, RF receiver, and accessory connections.
Estimated daily cycles based on gate weight and length with transformer.
Determine pull-to-open or push-to-open configuration.
Verify gate dimensions and material suitability for the operator.
Ensure gate is plumb, level, swings freely, and has good hinges.
Guidelines for grounding the gate opener system for lightning protection.
List of parts provided in the gate opener kit.
List of tools needed for the installation process.
List of parts the user must supply for installation.
Step-by-step guide for attaching the opener to a pull-to-open gate.
How to install the stop plate for the gate's closed position.
Step-by-step guide for attaching the opener to a push-to-open gate.
Guidelines for selecting an appropriate mounting location for the control box.
How to position the battery and connect power cables correctly.
Instructions for wiring the AC transformer to the control box.
Tips and procedures for mounting and positioning the receiver.
How to mount the panel for optimal sunlight exposure.
Connecting solar panel wires to the 18V input terminals.
Explains the settings for soft start, buzzer, and gate opening direction.
Procedures for setting closed and open gate limits.
Adjusting the stall force for obstruction detection.
Configuring the automatic gate closing delay.
How to program the remote transmitter with a unique code.
Details on common, cycle, safety, and exit input terminals.
Diagrams showing connections for push buttons, keypads, and sensors.
Instructions for wiring the automatic gate lock.
Information on relay outputs for locks, sirens, and lights.
Monthly checks, cleaning, and lubrication for the gate operator.
Expected voltage values for transformer, solar, and batteries.
Interpreting beeps to diagnose common operational issues.
Understanding LED status lights and blinking patterns.
Troubleshooting power and charging issues using LED indicators.
Procedures for requesting service or returning faulty components.
Fields to record serial number, date, and place of purchase.
General| Power Supply | 120 VAC |
|---|---|
| Maximum Gate Weight | 850 lbs |
| Battery Backup | Yes |
| Installation | DIY |
| Solar Compatible | Yes |
| Smart Control | No |
| Warranty | 18 months |
| Motor Type | DC Motor |
| Remote Control | Included |
| Current Draw | 1.5A |
| Safety Features | Obstruction Sensing |
