Need help?Do you have a question about the Miiego MiiBUDS ACTION and is the answer not in the manual?
Take out earbuds from case or press PLAY-button for 3s to power on. Blue LED flashes twice, hear 'Power ON'.
Place earbuds in case or press PLAY-button for 3s to power off. Red LED flashes 3 times.
Take out both earbuds from charging case; they connect automatically.
Activate Bluetooth on your device, search for 'MiiBUDS ACTION'.
Hear 'Connected' in one earbud. LEDs flash blue twice every 5 seconds.
Place earbuds in case. Red LEDs on earbuds are ON when charging, OFF when full.
Use 5V/1A adapter. Connect cable to side (E). 4 white LEDs indicate battery status.
Press the PLAY-button once on either earbud to play or pause music.
Hold PLAY-button on RIGHT for volume UP, LEFT for volume DOWN.
Double press PLAY-button on RIGHT for NEXT song, LEFT for PREVIOUS song.
Press once to answer/hang up. Double press to reject incoming calls.
Access Siri by triple-pressing the PLAY-button on either earbud.
Delete device, power on/hold PLAY-button for 3s, re-pair to device.
Bluetooth v5.0+EDR; Wireless range up to 10m. Frequency range: 2.402-2.480GHz.
Earbuds: 50 mA/h Li-ion. Charging case: 1800 mA/h Li-ion. Frequency Response: 20Hz-20KHz.
Do not use while driving or in hazardous situations. Avoid excessive volume to prevent hearing damage.
Keep away from children, animals, sunlight. Operating temps: -10°C to +45°C. Do not dispose in fire.
To Next Page
General
