Do you have a question about the Miiego MiiBUDS PLAY and is the answer not in the manual?
Use a 5V/1A USB adapter for charging. An LED indicator shows charging status. Full charging time is about 2.5-3 hours.
Ensure correct placement on the wireless charging plate/charger for full charging in approximately 2.5-3 hours.
Single tap the PLAY touch-button on either earbud to play or pause music.
Triple tap for volume up/down on right/left earbud; double tap for next/previous song.
Tap to answer/hang up calls. Press for 2 seconds to reject incoming calls.
Access Siri by pressing the PLAY touch-button on the LEFT earbud for 2 seconds.
Press the RIGHT earbud's PLAY touch-button for 2 seconds to turn ANC ON or OFF.
Press the RIGHT earbud's PLAY touch-button for 2 seconds to enable ambient sound mode.
ANC reduces environmental noise for clearer audio, primarily low-frequency bands.
Details frequency range, earbud and charging case battery capacity, and frequency response.
Includes warnings against use in traffic, high volumes, and risks of hearing damage or explosion.
Advises against prolonged listening at high volumes to prevent hearing damage.
States compliance with EU Directive 2014/53/EU and provides a link for consultation.
Identifies the model as MiiBUDS PLAY, designed in Denmark and produced in China.
Provides contact details for MIIEGO A/S, including address, phone, and email.
| Bluetooth Version | 5.0 |
|---|---|
| Water Resistance | IPX5 |
| Driver Size | 6 mm |
| Waterproof | No |
| Microphone | Yes |
| Frequency Response | 20 Hz - 20 kHz |
| Type | True Wireless |
| Weight | 4.5 g (each earbud) |
| Impedance | 16Ω |
| Charging Time | 1.5 hours |