Mikasa MT-55 - Page 3

5) model
MT-55 MT-55L MT-65H MT-72FW MT-72FWA MT-84F
6) Equipment
item number
251077 251084 251124 251242 251245 251247 251256 251257
7) Serial number
8) power source
cont. output
<m
a
x.
output
>
Robin EH09-2F
1.5kW <2.1kW>
Robin EH09-2F
1.5kW <2.1kW>
Honda
GX100U 1.7kW
<2.1kW>
Robin EH12-2D
2.1kW
<2.
6
kW>
Robin EH12-2D
2.1kW
<2.
6
kW>
Robin EH12-2D
2.1kW <2.6kW>
9) Measured
sound power
level(dB)
102 101 105 105 101 102
10) Guaranteed
sound power
level(dB)
107 105 107 107 107 107
11) Max. Sound
pressure
level(dB)
93 91 96 96 91 92
1) DECLARATION OF CONFORMITY
4) Type: Vibratory Rammers
2) Manufacturer’s name and address.
3) Name and address of the person who keeps the
technical documentation.
Mikasa Sangyo Co., Ltd.
4-3, Sarugaku-cho 1 chome, Chiyoda-ku, Tokyo101-0064, Japan
Yoshiharu Nishimaki, engineer
R. & D. Division, Mikasa Sangyo Co., Ltd.
Shiraoka-machi, Saitama, Japan
12) Conformity assessment according to Annex: VIII (Full Quality Assurance procedure)
13) Name and address of the Notified Body
Société Nationale de Certification et d’Homologation (SNCH)
11, route de Luxembourg
L-5230 Sandweiler䚷LUXEMBOURG
15) Declaration
The equipment referred in this document, fulfills with all the
requirements of Directive 2000/14/EC
14) Related Directive
Directive 2000/14/EC and, to be followed by Directive 2005/88/EC,
relating to the noise emission in the environment by equipment for
use outdoors.
Tokyo, Japan Jan, 2011
Signed by:
16) Other related Community Directives
2006/42/EC, 2005/88/EC, 2004/108/EC, 2002/88/EC(2004/26/EC)
EN500-1, EN500-4
17) EC Conformity Certificate No: e13*2000/14*2005/14*0472*01
For serial number, please refer it on front page.
Director, Product Control Division
Mikasa Sangyo Co., Ltd.
18) Place and date of the declaration
Keiichi YOSHIDA