Mikrofill 3 - Technical Data; Electrical Details; Connection Details

TECHNICAL DATA
04 TECHNICAL DOCUMENTATION
WRAS Approval Number:
ELECTRICAL DETAILS
• Supply Voltage:
• Full Load Current:
• Start Current:
• Fuse Rating:
• Maximum Load BMS Relays:
CONNECTION DETAILS
• Cold Water Inlet:
• System Outlet:
• Drain (via Tundish):
• Maximum Inlet Pressure:
• Maximum Cold Fill Pressure:
•Nominal Flow Rate:
•Dry Weight:
1806078
230 Volt
1 Amp
1 Amp
3 Amp
5 Amp
15mm Compression
15mm Compression
¾” BSP
5 Bar
4.7 Bar
14 l/min at 2 Bar
5 kg