MikroTik Chateau LTE18 ax Quick Guide

 Insert a micro SIM card into the slot located under the device.
 Connect the power adapter to the DC jack.
 Open https://192.168.88.1 in your web browser to start the configuration.
 User name: admin, please find the password on the sticker.
 Update the device by clicking the (Check_for_updates) on the right side and updating your RouterOS
software to the latest version. Must have a valid SIM card inserted.
 To manually update the device, please go to https://mikrotik.com/download
 Choose v7 (ARM64-routeros-7.7-arm64.npk, wifiwave2-7.7-arm64.npk) packages for this device and
download them to your PC.
 Upload downloaded packages to the (WebFig) (Files) menu and reboot the device.
 Updating your RouterOS software to the latest version will ensure the best performance, stability, and
security updates.
 In the (QuickSet) menu set up the following: Choose your country, to apply country regulation settings.
 Set up your wireless network password in the left field.
 Set up your router password in the bottom field.
Safety Information:
 Before you work on any MikroTik equipment, be aware of the hazards involved with electrical
circuitry, and be familiar with standard practices for preventing accidents. The installer should be
familiar with network structures, terms, and concepts.
 Use only the power supply and accessories approved by the manufacturer, which can be found in the
original packaging of this product.
 This equipment is to be installed by trained and qualified personnel, as per these installation
instructions. The installer is responsible for making sure, that the Installation of the equipment is
compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the
device.
 This product is intended to be installed indoors. Keep this product away from water, fire, humidity, or
hot environments.
 We cannot guarantee that no accidents or damage will occur due to the improper use of the device.
Please use this product with care and operate at your own risk!
 In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging
the power adapter from the power outlet.
Exposure to Radio Frequency Radiation: This MikroTik equipment complies with the European
Union radiation exposure limits set forth for an uncontrolled environment. This MikroTik device

MikroTik Chateau LTE18 ax Specifications

General

DSL WAN	-
Ethernet WAN	Yes
WAN connection type	RJ-45
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6 (802.11ax)
Top Wi-Fi standard	Wi-Fi 6 (802.11ax)
WLAN data transfer rate (max)	1200 Mbit/s
WLAN data transfer rate (first band)	574 Mbit/s
Antennas quantity	2
Antenna gain level (max)	6 dBi
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	2500 Mbit/s
Ethernet LAN interface type	Ethernet
4G standard	LTE-TDD & LTE-FDD
SIM card type	MicroSIM
4G bands supported	700, 800, 850, 900, 1800, 2100, 2300, 2500, 2600 MHz
GSM bands supported	850, 900, 1800, 2100 MHz
Mobile network generation	4G
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	4
Product type	Tabletop router
Product color	White
Certification	CE, EAC
Internal memory	128 MB
Processor frequency	864 MHz
RAM capacity (Wi-Fi point)	1000 MB
Output voltage	12 - 28 V
Power source type	DC
Power consumption (typical)	16 W
Operating temperature (T-T)	-40 - 65 °C
Sustainability certificates	RoHS
Cables included	UTP

Weight and Dimensions

Depth	156 mm
Width	240 mm
Height	44 mm