cAP ax
cAP ax
Safety Warnings
Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing
accidents.
Ultimate disposal of this product should be handled according to all national laws and regulations.
The Installation of the equipment must comply with local and national electrical codes.
This unit is intended to be installed in the rackmount. Please read the mounting instructions carefully before beginning installation. Failure to use the
correct hardware or to follow the correct procedures could result in a hazardous situation to people and damage to the system.
This product is intended to be installed indoors. Keep this product away from water, fire, humidity or hot environments.
Use only the power supply and accessories approved by the manufacturer, and which can be found in the original packaging of this product.
Read the installation instructions before connecting the system to the power source.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your
own risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power plug from the power outlet.
It is the customer's responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling
requirements, and Dynamic Frequency Selection (DFS) requirements. All Mikrotik radio devices must be professionally installed.
Exposure to Radio Frequency Radiation: This MikroTik equipment complies with the FCC, IC, and European Union radiation exposure limits set forth for an
uncontrolled environment.This MikroTik device should be installed and operated no closer than 30 centimeters from your body, occupational user, or the
general public.
Connecting
Make sure your Internet service provider is allowing hardware change and will issue an automatic IP address;
Connect the device to the power source;
Open network connections on your computer and search for MikroTik wireless network - connect to it;
The configuration can be done through the wireless network using a web browser or mobile app. Alternatively, you can use a WinBox
configuration tool ;https://mt.lv/winbox
Open in your web browser to start configuration, user name: a and there is no password by default https://192.168.88.1
dmin
(or, for some models,
check user and wireless passwords on the sticker);
Click the (Check for updates) button and update your RouterOS software to the latest version;
Choose your country, to apply country regulation settings;
Set up your wireless network password;
Set up your router password;
Powering
PoE-in 802.3af/at
PoE-Out Passive PoE up to 57V (<30v DC jack must be used, >30V PoE-In and
DC jack can be used)
To Next Page
Need help?
General
Weight and Dimensions
