1. Attach rack ears to both sides of the device and tighten four screws to secure them in place, as shown in
the picture.
2. Place the device in the rackmount enclosure and align it with the holes so that the device fits
conveniently.
3. Tighten screws to secure it in place.
The device has no protection from water contamination, please ensure the placement of the device in a
dry and ventilated environment.
We recommend Cat6 cables for our devices.
The mounting and configuration of this device should be done by a qualified person.
Specifications
Please visit the wiki pages for MikroTik SFP module compatibility
table: https://wiki.mikrotik.com/wiki/MikroTik_SFP_module_compatibility_table
For more information about this product, specifications, pictures, downloads, and test results please
visit our web page: https://mikrotik.com/product/CRS112-8G-4S-IN
Operating System Support
The device supports RouterOS software with version number 6.45.6 at or above what is indicated in the
RouterOS menu /system resource. Other operating systems have not been tested.
To Next Page
Loading...
