MikroTik CRS354-48G-4S+2Q+RM Quick Guide

Quick Guide - CRS354-48G-4S+2Q+RM
EN - English - Quick Guide:
This device needs to be upgraded to RouterOS v7.10 or the latest version to ensure compliance with
local authority regulations!
It is the end user's responsibility to follow local country regulations. All MikroTik devices must be
professionally installed.
This Quick Guide covers the model: CRS354-48G-4S+2Q+RM.
This is Network Device. You can find the product model name on the case label (ID).
Please visit the user manual page on https://mt.lv/um for the updated user manual. Or scan the QR
code with your mobile phone.
Technical specifications, Full EU Declaration of Conformity, brochures, and more info about products
at https://mikrotik.com/products
The most important technical specifications for this product can be found on the last page of this Quick
Guide.
Configuration manual for software in your language with additional information can be found
at https://mt.lv/help
MikroTik devices are for professional use. If you do not have qualifications please seek a
consultant https://mikrotik.com/consultants
First steps:
 Connect with your PC to any Ethernet port;
 Connect the device to a power source;
 Set your IP for PC to 192.168.88.2/24;

MikroTik CRS354-48G-4S+2Q+RM Specifications

General

Switch type	Managed
Switch layer	L2
Stackable	-
Certification	CE/RED, EAC, RoHS
Product color	Gray
Rack mounting	Yes
International Protection (IP) code	IPX0
Flash memory	16 MB
Internal memory	64 MB
Processor frequency	650 MHz
AC input voltage	100 - 240 V
Power consumption (max)	60 W
Operating temperature (T-T)	-20 - 60 °C
Console port	RJ-45
Power connector	AC-in jack
SFP+ module slots quantity	4
QSFP+ module slots quantity	2
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	48
Cables included	AC
Forwarding rate	235 Mpps
MAC address table	- entries
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	297 mm
Width	443 mm
Height	44 mm