EasyManuals Logo
Home>MikroTik>Network Hardware>L009UiGS-2HaxD-IN

MikroTik L009UiGS-2HaxD-IN Quick Guide

MikroTik L009UiGS-2HaxD-IN
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
Open https://192.168.88.1 in your web browser to start the configuration;
User name: admin and there is no password by default (or, for some models, check user and wireless
passwords on the sticker);
Click the "Check_for_updates" button on the right side and update your RouterOS software to the latest
version. The device must have an active Internet connection;
The device will reboot;
Connect again and choose your country on the left side of the screen, to apply country regulation
settings;
Set up your wireless network password, the password must be at least eight symbols;
Set up your router password in the bottom field to the right and repeat it, it will be used to log in next
time.
Safety Information:
Before you work on any MikroTik equipment, be aware of the hazards involved with electrical
circuitry, and be familiar with standard practices for preventing accidents. The installer should be
familiar with network structures, terms, and concepts.
Use only the power supply and accessories approved by the manufacturer, which can be found in the
original packaging of this product.
This equipment is to be installed by trained and qualified personnel, as per these installation
instructions. The installer is responsible for making sure, that the Installation of the equipment is
compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the
device.
This product is intended to be installed indoors. Keep this product away from water, fire, humidity, or
hot environments.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device.
Please use this product with care and operate at your own risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging
the power adapter from the power outlet.
Adapter shall be installed near the equipment and shall be easily accessible.
To avoid contamination of the environment, separate the device from household waste and dispose of it
in a safe manner, for example, in designated areas. Become familiar with procedures for properly
transporting the equipment to designated collection points in your area.
Exposure to Radio Frequency Radiation: This MikroTik equipment complies with the European
Union radiation exposure limits set forth for an uncontrolled environment. This MikroTik device
should be installed and operated no closer than 20 centimeters from your body, occupational user, or
the general public.

Other manuals for MikroTik L009UiGS-2HaxD-IN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MikroTik L009UiGS-2HaxD-IN and is the answer not in the manual?

MikroTik L009UiGS-2HaxD-IN Specifications

General IconGeneral
Ethernet WAN-
Wi-Fi bandSingle-band (2.4 GHz)
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 6E (802.11ax)
Channels quantity2 channels
Top Wi-Fi standardWi-Fi 6 (802.11ax)
WLAN data transfer rate (max)574 Mbit/s
Ethernet LANYes
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Ethernet LAN (RJ-45) ports8
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity1
Product typeTabletop router
Product colorRed
Antenna gain level (max)4 dBi
Flash memory128 MB
Internal memory512 MB
Processor cores2
Processor frequency800 MHz
Power source typeDC, PoE
Storage temperature (T-T)-40 - 70 °C

Related product manuals