EasyManuals Logo
Home>MikroTik>Network Hardware>L009UiGS-2HaxD-IN

MikroTik L009UiGS-2HaxD-IN Quick Guide

MikroTik L009UiGS-2HaxD-IN
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #56 background imageLoading...
Page #56 background image
product are to be used. The installer should configure the output power level of antennas, according to
country regulations and per antenna type. Professional installation is required for equipment with
connectors to ensure compliance with health and safety issues.
APPROVED 2.4 GHz ANTENNA:
3.46 dBi Omnidirectional Antenna (Model: HGO indoor antenna).
The same type of antenna and lower antenna gain than listed above may also be used in accordance
with the certification.
Exposure to Radio Frequency Radiation: This MikroTik equipment complies with the FCC radiation
exposure limits set forth for an uncontrolled environment. This MikroTik device should be installed
and operated no closer than 20 centimeters from your body, occupational user, or the general public.
Innovation, Science and Economic Development Canada
Model IC ID
L009UiGS-2HaxD-
IN
7442A-
L0092AXIN
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science,
and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following
two conditions: (1) This device may not cause interference. (2) This device must accept any
interference, including interference that may cause undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR
d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts
de licence. L’exploitation est autorisée aux deux conditions suivantes : 1) Lappareil ne doit pas
produire de brouillage; 2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-003 (B) / NMB-003 (B)
The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for
harmful interference to co-channel mobile satellite systems.
Les dispositifs fonctionnant dans la bande de 5 150 à 5 250 MHz sont réservés uniquement pour une
utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites
mobiles utilisant les mêmes canaux
Antenna Installation WARNING: It is the installer's responsibility to ensure that when using the
authorized antennas in Canada (or where IC rules apply); only those antennas certified with the product
are to be used. The installer should configure the output power level of antennas, according to country

Other manuals for MikroTik L009UiGS-2HaxD-IN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MikroTik L009UiGS-2HaxD-IN and is the answer not in the manual?

MikroTik L009UiGS-2HaxD-IN Specifications

General IconGeneral
Ethernet WAN-
Wi-Fi bandSingle-band (2.4 GHz)
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 6E (802.11ax)
Channels quantity2 channels
Top Wi-Fi standardWi-Fi 6 (802.11ax)
WLAN data transfer rate (max)574 Mbit/s
Ethernet LANYes
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Ethernet LAN (RJ-45) ports8
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity1
Product typeTabletop router
Product colorRed
Antenna gain level (max)4 dBi
Flash memory128 MB
Internal memory512 MB
Processor cores2
Processor frequency800 MHz
Power source typeDC, PoE
Storage temperature (T-T)-40 - 70 °C

Related product manuals