EN - English -Quick Guide:
This is Network Device. You can find the product model name on the case label (ID).
Please visit the user manual page on for the full up-to-date user manual. Or scan the QR code with your mobile phone.https://mt.lv/um
The most relevant technical specifications for this product can be found on the last page of this Quick Guide.
Technical specifications, full EU Decalaration of Conformity, brochures, and more info about products at https://mikrotik.com/products
Configuration manual for software in your language with additional information can be found athttps://mt.lv/help
MikroTik devices are for professional use. If you do not have qualifications please seek a consultanthttps://mikrotik.com/consultants
First steps:
Make sure your ISP will accept hardware change and will issue an IP address.
Connect your WAN cable to port 1, and LAN computers to the rest ports.
Connect the device to the included adapter.
Set LAN computer IP configuration to automatic (DHCP).
In case the IP is not available, use the (WinBox) configuration tool to connect through MAC address.
Open in your web browser to start configuration, there is no password by default, you will be logged in automatically.https://192.168.88.1
Click the (Check_for_updates) button and update your RouterOS software to the latest version. The device needs to have an active Internet connection.
For CRS and CCR manually update the device, go to our download pagehttps://mikrotik.com/download
Choose your architecture based on your device model under the menu (System/Resources) and download the latest packages from a stable channel to your
PC.
Open (WebFig) or (WinBox) and upload packages in the (Files) menu.
Reboot the device.
Set up your password to secure the device.
Safety Information:
Before you work on any MikroTik equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing
accidents. The installer should be familiar with network structures, terms, and concepts.
Use only the power supply and accessories approved by the manufacturer, and which can be found in the original packaging of this product.
This equipment is to be installed by trained and qualified personnel, as per these installation instructions. The installer is responsible for making sure, that the
Installation of the equipment is compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the device.
This product is intended to be installed indoors. Keep this product away from water, fire, humidity, or hot environments.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your own
risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power plug from the power outlet.
This is a Class A product. In a domestic environment, this product might cause radio interference in which case the user might be required to take adequate
measures.
Manufacturer: Mikrotikls SIA, Unijas 2, Riga, Latvia, LV1039.
Note:For some models, check the user and wireless passwords on the sticker.
BG - Български. Бързо ръководство
This device needs to be upgraded to RouterOS v7.10 or the latest version to ensure compliance with local authority regulations!
It is the end users' responsibility to follow local country regulations. All MikroTik devices must be professionally installed.
To Next Page
Need help?
General
Weight and Dimensions
