Do you have a question about the Mil-Ram Technology, Inc. TA-2102 and is the answer not in the manual?
Accessing and viewing operational data like Peak Value and Sensor Life.
Performing a built-in loop test to verify signal output and alarms.
Explains the operational states of external relays used with the transmitter.
Guide to zero calibration in a clean air environment for baseline accuracy.
Instructions for span calibration using a specific calibration gas concentration.
| Sensor Type | Electrochemical |
|---|---|
| Output Signal | 4-20 mA |
| Gas Detected | Oxygen (O2) |
| Power Supply | 12-30 VDC |
| Operating Temperature | -20°C to +50°C (-4°F to +122°F) |
| Enclosure | NEMA 4X |
| Operating Voltage | 12-30 VDC |
Loading...