To Next PageTo Next Page
Need help?Do you have a question about the Milennia MIL-MR60 and is the answer not in the manual?
General| RMS Power Output (Channels) | 4 |
|---|---|
| Subwoofer Preamp Output | Yes |
| Tuner | AM/FM |
| Bluetooth | Yes |
| USB Input | Yes |
| AUX Input | Yes |
| Display Type | LCD |
| Wireless Remote | Yes |
| GPS Navigation | No |
| DVD Player | No |
| Touchscreen | No |
| Type | Car Receiver |
Instructions for resetting the unit by holding a button for a specified duration.
Details tuning range and sensitivity for FM radio reception.
Details tuning range and sensitivity for AM radio reception.
Details power output, power supply, and speaker impedance.
Functions for navigating folders up or down during MP3 playback.
Allows searching for specific tracks by number, name, or directory.
Shows MP3 file metadata such as track title, artist, and album.
Allows selection of next/previous track or fast-forward/fast-rewind.
Controls playback, pausing, and scanning the first seconds of tracks.
Enables repeating current track/folder or playing tracks randomly.
Ensures the black wire is connected to a good ground point on the vehicle.
Model is suitable for negative ground systems only.
Disconnect battery before wiring; connect wires to metal part or negative terminal.
Resets the unit by pressing MODE and Preset 1 buttons simultaneously.
Choose location carefully to avoid interference and extreme conditions.
Illustrates installation steps and identifies mounting hardware.
Switch to radio mode and select desired band (FM1, FM2, FM3, AM).
Allows automatic station seeking or manual tuning in steps.
Manually store stations or use auto preset scan for storage.
Recall memorized stations by preset buttons or auto scan.
Automatic selection of stereo or mono based on broadcast signal.
Accesses secondary menus for volume, area, beep, clock, and loudness.
Sets the default volume level upon unit power-on.
Configures reception area (USA/EUR) and button beep sound.
Allows adjustment of the unit's clock time.
Emphasizes bass and treble at low volume levels.
Adjusts volume level by turning the spindle knob.
Switches between Radio, USB, AUX modes and handles band/ID3 display.
Lists and illustrates the various parts of the unit and its accessories.
Guide for replacing blown fuses and warnings about amperage.
Controls power, muting, and cycling through operation modes.
Accesses audio controls and adjusts volume.
Manages radio bands and USB track playback functions.
Handles radio presets, intro scan, repeat, random, and directory navigation.
Initiates auto scan for radio presets and provides AUX input.
Port for connecting USB devices for media playback.
Adjusts Bass, Treble, Balance, Fader, and DSP settings.
Selects sound profiles like FLAT, CLASSICS, POP, ROCK, or DSP OFF.
