Note:
1. When you're using "line-laser" function,
please keep the left side surface (the same
side as line-laser) of the device parallel to the
Measuring Range(m)
Triangular Area
Measurement
Pythagoras (3-point) ①
Trapezoid
Measurement ①
0.2-40/60/80/100
-5
±(2.0mm+5x10
D)
√
√
√
Specification
Measuring
accuracy
Continuous
Measurement
Area Measurement
√
√
Pythagoras (2-point)
√
Pythagoras (3-point) ②
√
Auto Height
√
Bluetooth 4.0
Auto Level
√
Rotary screen
Single Distance
Measurement
5‰
Volume
Measurement
√
2.4 inch HD colored
±(0.3°+0.1°+0.01*D)
4
2
1
Wheel Measurement
Accuracy
Trapezoid
Measurement ②
Point to Point (P2P)
Measurement
Laser Line Marking
Function
√
Add/Subtract
√
Tilt Sensor
Tilt Accuracy
√
√
√
√
√
√
screen
Display Screen
Wheel Measurement
√
3
2. The angle of the laser line displayed on
screen is not absolutely accurate, because of
environment and inevitable and slight improper
operation. The angle is for reference only. If you
need highly accurate laser line, please use
more accurate angle measuring tools.
Top
Figure A
Front
0°
30°
60°-60°
-30°
30° -30°
-60°60°
0°
Figure B
wall, the angle of the line to horizon is
displayed on screen(Figure A). Head up and
head down the device, to project the line at
different angles.(Figure B)
Do not turn the head of the device left or right,
or it will cause incorrect angle readings.
Trouble shooting
All information will be showed as code or
“Error”, the following are all codes and
corresponding explain and solution.
Andriod APP
IOS APP
Refer to user manual,
repeat the procedures.
255
256
Calculation error
Received signal
too weak or
measurement
time too long
Received signal
too strong.
Out of measuring
range
204
Measuring the distance
within measurement
range.
Code Cause Corrective Measure
220
Low battery
Replace batteries or
charge the batteries
Hardware error
Switch on/off the device,
if the symbol still
appears after several
times, please contact
with your dealer.
261
500
Improve the reflective
surface. (Use target
plate, or don't aim at
strong light)
Improve the reflective
surface. (Use target
plate, white paper)
Class 2
Laser Type
630-670nm,
＜1mW
Memory
Auto Power off
Protection Class
m / ft / in / ft+in
Front/Tripod/Rear
50 values
After 180s of inactivity
Measuring Unit
Laser Class
IP65
Measuring Reference
Voice Broadcast Chinese/English
BPI AAA 800
(NI-MH rechargeable battery)
3*AAA alkraine battery powered
Battery Type
Charging Interface
Storage Temperature
Altitude up to 2000m
Humidity 0-95%
Size(mm) 137x55x26
-20℃~70℃(-4°F~158°F)
Operating
Temperature
Weight(g) 132
0℃~+40℃(32°F~+104°F)
USB-C
4. Tilt Accuracy
0.1° is caused by temperature, D is +/- 0~45°, eg: at normal
temperature the accuracy is +/-0.3° at angle of 0°，at
abnormal temperature the accuracy is +/-0.85° at angle of 45° .
1. Measuring Range
The Rear is the default reference. The maximum range shall
be different according to different models. The actual range
refers to the package.
Measuring Accuracy (“D” is the measured length)2.
If measuring under favorable conditions, such as smooth
surface, proper temperature and indoor lighting, the device
is able to work within certain range as indicated.
Maximum deviation occurs under unfavorable conditions
such as bright sunlight or when measuring to poorly reflecting
or very rough surfaces.
Tips: In case of bright sunlight and bad reflection of the object,
please use the target plate or reflector.
3. Wheel Measurement Accuracy
Note: Please keep the device moving smoothly while
measuring,
Mileseey Pro APP Download
The product specifications are subject to
change without notice, all final interpretation
rights were reserved by Mileseey Technology
Co., Ltd. All trademarks, product images,
technical parameters are properties of
Mileseey Technology Co., Ltd. All rights
reserved.
Copyrights
Fax: +86 755 86701592
Email: info@mileseey.net
Contact Us
Shenzhen Mileseey Technology Co., LTD.
Telephone: +86 755 86329055
Website: www.mileseey.net
Add.: 6/F, Building 9,
Zhongguan Honghualing
Industrial South Park II, 1213
Liuxian Ave, Taoyuan Street, Nanshan District,
Shenzhen, 518055, P.R. China.
Model name
Date of purchase
User Info
User Name
Address &Tel.
warranty period
Dealer
Dealer’s name, address, tel.
Serial Number
Fault
Description
Invoice Code
Warranty Card
Warranty period
This laser distance meter has two years warranty in the
precondition of non-artificial damage.
Within the warranty period, certain maintenance
costs will be charged under following cases
Damages caused by improper usage or maintenance of the
tool;
The tool had been disassembled or mended by
non-authorized third party;
Without the warranty card or the purchase invoice;
The serial number on the warranty card is different with the
one on product;
The serial number has been altered or abraded;
Damaged by any force majeure factors;
Replacement of the worn out accessories；
Damages caused by the abnormal factors such as the
temperature/humidity in usage;
Damages caused by the improper operation.
Please send the tool with warranty card &
purchase invoice to local dealer if maintenance
needed. The warranty card will not be reissued
if lost; please keep it carefully for maintenance.
Warranty Terms
To Previous Page
Loading...