R2B User Manual
Product Overview
Thank you for purchasing and using MileSeey
handheld laser distance meter, please read
the manual carefully before using.
Mileseey product model R2B is a handheld
Laser Distance Meter integrated with
measuring wheel and laser level.
Thanks to robust housing, compact inner
structure,R2B offers the perfect features of
IP65 waterproof, drop-resistance and super
long lifespan. With 2.4 inch HD colored
display, it enables user to read the data
easily.
Adopting the most cutting-edge technologies
of 3D measurement, curve measurement,
angle marking function, R2B solved a variety
of difficulties for all users.
R2B has 15 functions to satisfy different
measuring needs and greatly improved
user experience.
11
12
10
13
Battery installation and using instructions
Laser Distance Meter
Safety Instructions
The device is categorized into Class 2 laser
product. DO NOT stare at laser directly or
shoot at others or it will cause damage to
eyes.
The product is in accordance with strict
standards and regulations through the
development and manufacturing, but still
can’t entirely exclude the possibility of
interference to other devices, may cause
discomfort to human and animals.
Please DO NOT use this product under
explosive or corrosive environment.
Please DO NOT use this product near
medical devices.
Warning
a,
b,
Please DO NOT use this product on the
plane.
For the safe use of this handheld laser
distance meter, please read below instructions
carefully.
Press the battery cover and slide down to
unlock it first, then uplift it to open. (The
battery cover is tight for waterproof purpose,
please open it with some strength)
1. Measuring Button
Short press to measure/confirm.
Long press to continuous measurement mode
2. Function Button
Press this button to function menu, select
functions by up and down key, press measure
button to confirm.
3. Setup, Turn on/off laser level Button
Short press to setup menu, select setup options
by up and down key, press measure button to
confirm.
4. Wheel Measurement Button
Short press to turn on/off wheel measurement
5. Up/Add Button
Press this button to page up/Add
6.ON/OFF/Return Button
Long press to turn on/off, short press to
return to Single measurement
After the battery is placed, cover and hold the
battery door, press and slide to the top, the
cover can be sealed.
Insert 3* AAA rechargeable batteries, Ni-MH
observing correct polarity.
if the equipment is used in a manner not
specified by the manufacturer, the protection
provided by the equipment may be impaired.
The standard batteries are 3 pieces of AAA
NI-MH rechargeable batteries, common dry
batteries are workable (Do not charge
non-rechargeable batteries). Charge the NI-MH
batteries by connecting the charging port and
adapter or PC with the USB-C cable.
Warning: ①Do not charge non-rechargeable
batteries to avoid any accidents. ②Do not use
rechargeable batteries and non-rechargeable
batteries at the same time to avoid any
accidents. MileSeey will not be responsible for
accident due to charging dry batteries.
Laser distance meter may heat up when
charging, it's normal, has no effect on the
device performance and service life. If it is not
used for a long time, remove the batteries and
keep it in dry place.
Appearance
2
1
3
6
5
7
8
4
9
Warning:
Do not use aggressive cleaning agents or
solutions. Use only a clean, soft cloth for
cleaning.
FCC Statements:
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy. However,
there is no guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful interference to
radio or reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
1,Disposal
Everyone is responsible for environmental
protection.
It’s prohibited to dispose used batteries
together with household waste, please
collect used batteries to designated waste
station.
This product must not be recycled with
household waste. Dispose of the product
appropriately in accordance with the national
regulations in your country.
2,Scope of Responsibility
MileSeey will not be responsible for the
damages caused by improper use below:
*Using the product without instruction;
*Use of accessories from other
manufacturers without approval from
MileSeey ;
*Carrying out modification or conversion
of the product.
• Consult the dealer or an experienced
technician for help.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
1) This device may not cause harmful
interference, and
2) This device must accept any interference
received, including interference that my cause
undesired operation.
MODIFICATION: Any changes or modifications
not expressly approved by the grantee of this
device could void the user’s authority to operate
the device.
To Next Page
Need help?
General