EasyManua.ls Logo

MILL HT500 - Page 4

MILL HT500
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The heater must not be used if either the cord or plug is dama-
ged. The heater must not be used if it has been dropped on the
oor or is damaged in any other way causing it to malfunction.
The cord must be repaired by the manufacturer or by an expert if
it has been damaged, to avoid dangerous situations.
Avoid using extension cords, which may overheat and could
possibly start a re.
Never cover the air vents on the heater. Avoid potential re ha-
zards by making sure the air intakes are not blocked or covered.
The heater should be used in rooms with normal at oors.
The heater should not be installed in close proximity to ammab-
le materials of any kind because there can always be a risk of
re.
The heater must never be used in rooms where gasoline, paint
or other ammable liquids are stored, such as in a garage.
Never touch an electric heater with wet hands.
Some parts of this product can become very hot and cause
burns. Particular attention has to be given where children and
vulnerable people are present.
The heater must be switched off, the plug removed and the hea-
ter must cool down before it is moved.
EN 4 millnorway.com

Related product manuals