To Next Page
T
Travis EvansAug 18, 2025
What to do if my Miller Electric Blue Star 145 DX Inverter engine will not start?
- GGregory PorterAug 18, 2025
If your Miller Electric Inverter's engine won't start, first, verify the fuel level. Then, adjust the choke control to the correct position. Ensure the fuel valve is open, but remember to close it before moving the unit to prevent flooding. For DX models only, check the battery voltage and connections, tightening if necessary. Also, check the oil level, as the engine will stop if it's too low; refill with the correct viscosity oil. If these steps don't resolve the issue, you may need further assistance.
General
