To Next PageTo Next Page
Need help?Do you have a question about the Miller Vulcan 810 NYC and is the answer not in the manual?
General| Brand | Miller |
|---|---|
| Model | Vulcan 810 NYC |
| Category | Utility Vehicle |
| Language | English |
Read and understand all safety instructions, inspect the wrecker for damage, and check for fluid leaks.
Follow guidelines on clothing, protective gear, load ratings, operating controls, and travel positions.
Only authorized personnel should operate the wrecker; use safety chains on all towing and lifting applications.
Dangers of working near power lines; proper use of winch cables and cable clips.
Tips on wrecker maintenance, inspecting cables for damage, and using safety chains.
Do not exceed load ratings, ensure winch clutch is engaged, and be aware of boom extension effects.
Use safety blocks, avoid tying down wrecker frame, and stay within cable working limits.
Keep bystanders clear, avoid over-revving the engine, and secure steering wheels properly.
Maintain front axle weight, check hook-up, install safety chains, and release towed vehicle brakes.
Proper methods for towing on different wheels and requirements for night towing.
Use flashing lights legally, avoid over-winding winch cable, and use straps/chains on wheel lifts.
Illustrations showing why wheel straps are crucial for securing towed vehicles.
Examples of how vehicles can become loose from wheel lifts without proper strap usage.
Reinforces the necessity of using both wheel straps and safety chains for secure towing.
Key factors for safe towing: front axle weight and a formula for maximum lifted load.
Details of the 8-ton recovery boom, winch, and body specifications for the 810 NYC model.
Specifications for the winch rating, cable type, diameter, length, and working limit.
Specifications for the wheel lift's retracted/extended distances and hydraulic extension.
How the hydraulic pump engages via the clutch pump switch and operates at idle speed.
Activation of hydraulic pump via handheld control unit switches.
Steps for lowering the boom, adjusting engine speed, and preparing for vehicle hook-up.
Procedures for manual operation of the 810 NYC in case of power loss or malfunction.
General lubrication and preventive maintenance tasks to be performed monthly or more often.
Detailed tasks including checking oil levels, replacing filters, lubricating fittings, and oiling bearing surfaces.
List of recommended hydraulic oils, gear oils, greases, and other lubricants for various components.
Hydraulic schematic showing all components, functions, and fluid paths for the 810 NYC.
