To Next PageTo Next Page
Need help?Do you have a question about the Milnor 30022V6J and is the answer not in the manual?
General| Model | 30022V6J |
|---|---|
| Category | Washer |
| Brand | Milnor |
| Phase | 3 |
| Frequency | 60 Hz |
| Motor HP | 5 HP |
| Extract G-Force | 300 G |
| Type | Commercial Washer |
| Capacity | 60 lb |
| Voltage | 208-240 |
Information on the cover identifying the manual, including manual number, ECN, publishing system, and access date.
Lists trademarks used by Pellerin Milnor Corporation within the manual.
Requirements for the laundry facility floor, clearance, ventilation, and service connections.
Instructions for personnel regarding hazard avoidance and safe operating procedures.
Ensuring safety devices are not disabled or missing and that malfunctioning devices are serviced.
Information on hazards found on placards, in the Safety Guide, and other manuals.
Ensuring machine inspection and servicing according to good practice and schedules.
Instructions regarding electrical and mechanical hazards inside the machine and enclosures.
Hazards resulting from inoperative or damaged safety and mechanical devices.
Hazards related to careless operator actions and machine usage.
Hazards related to careless actions by service personnel during maintenance.
Discussion on floor/foundation requirements for rigid washer-extractors.
Discussion on floor/foundation requirements for flexibly-mounted washer-extractors.
Guidance on determining floor strength and rigidity requirements.
List of parts for safety placard placement on 30015/30022Txx & Vxx machines.
List of parts for guards and covers on 30015V7J/T5J/T5E and 30022V6J/T5J/T5E machines.
Guidelines for lubrication to ensure safe operation and optimum performance.
Procedure for maintenance of main bearing housings for specific models.
Checklist for preventive maintenance tasks and their frequency.
Illustrations and descriptions of key maintenance points.
Information on how fasteners loosen and how threadlocker prevents it.
Instructions and illustrations for applying threadlocker to bolts, nuts, and blind holes.
Method for removing high strength threadlockers using heat.
Drive chart for 30015T5J,T5E & 30022T5J,T5E washer-extractors.
Diagram and parts list for motor mount assembly on various models.
Installation procedure for cylinder, shell, bearing, and console components.
Diagram and parts list for the main bearing assembly (30015V7J, T5J, T5E, M6x).
Assembly details for shellfront, conduit, and interlock system.
Diagram and parts list for the door assembly.
Diagram and parts list for the interlock assembly.
Instructions for installing the soap chute assembly.
Diagram and parts list for the peristaltic supply box.
Diagram and parts list for the 3 compartment supply injector.
Key to standard and isometric symbols used in schematics.
Schematic diagrams for water, steam, and drain systems.
Diagram and parts list for water inlet assemblies with peristaltic supply.
Diagram and parts list for level switches.
Information on 1/2” & 3/4” Hayes Electric Steam Valves, including maintenance.
Instructions for installing the drain sump.
Instructions for drain valve installation.
Diagram and parts list for the 3" electric drain valve.
